Learn how to raise your odds of success

 

How We Build Features – Expanded (Q&A)

Written by Ash Maurya

I received lots of great questions on the “How We Build Features” post that I decided to do a follow-on post Q&A-style:

Features versus Bugs and the 80/20 Rule

Chris Cornutt: I’d love to see an expanded version of the “Features vs Bugs” section. I’m a developer and it’s too easy to get caught up in the weeds of the code and miss what should be considered a “feature”.

For me, the features versus bugs distinction is pretty simple. Bugs identify some defect in code while features identify new functionality which could in turn be a small enhancement or a big minimal marketable feature (MMF). Bugs and small features get put on our task board and pulled from there (unless it’s an emergency). Larger features get tracked through the 4-stage Kanban board.

The more interesting distinction for me is between building new features and improving existing features. When you first launch a product, lots of things can and do go wrong. Many of these may not be directly attributable to defects but rather shortcomings in design (usability), positioning, or something else.

Lindsay Brechler: Do you have a target ratio for bug fixes-to-features in development?

While we don’t have a target bugs-to-feature ratio, we do try and follow a 80/20 rule that places more emphasis on feature improvement over feature building:

This rule is especially applicable when your MVP is the result of dozens of problem and solution interviews. While it may be easy to rationalize a change under the guise of a “pivot”, it’s critical NOT to give up too early on your MVP.

Process Tradeoffs

A.T. and Eric Katerman: Do you follow this process for every feature? Aren’t some features just obvious?

You need to be results and not process oriented.

We only follow the full-blown (4-stage Kanban) process for minimal marketable features (MMFs). Like your MVP, new MMFs are plagued with uncertainty – they are experiments. We follow this process to de-risk these big features in stages. The goal is waste reduction by which I specifically mean building a better product using less time, money, and effort.

Whenever this isn’t true i.e. you think you understand the problem and solution well enough and can build a complete feature (or an entire MVP) with less effort (over the alternative), skip the pre-build interviews, just build it, and then measure the results with customers through a combo Problem/Solution interview.

Part of becoming a good practitioner is honing your judgement. Even if you grossly under-estimate the effort, hidden costs, or impact of a particular feature, you should hopefully learn from the iteration and get better over time – provided you don’t skip measuring your results.

Wes Winham: How do you combat the added latency that waiting on qualitative validation gives?

I’ve found pre-build customer validation to always be worth the effort. At a minimum, it results in making the solution better (serving as a usability test) and in several cases it has prevented us from wasting weeks of effort building a “nice-to-have” feature.

Here’s an example: We recently mocked-up some new timeline and versioning oriented flows for Lean Canvas. Building all this functionality could easily have taken us weeks and we hadn’t completely worked out how it would all fit together for ourselves. So we started with some “real-data” mockups which took us a couple of days to build.

During this time, we went through a half a dozen rapid iterations internally before showing the results to customers. The mockups helped us articulate both the problem we were solving and demonstrate how we intended to solve it. We talked to 10 customers and while all of them identified strongly with the problem, almost all of them found the same parts of the solution “visually impressive” but lacking on addressing their immediate needs.

Here is one of those mockups:

This feedback helped us reduce scope and prioritize our focus around features that promised the biggest potential impact – all without writing a single line of code.

Getting Customer Feedback

Wes Winham: How do you handle scheduling of qualitative review sessions? Do you find that it’s hard/easy to get 10 minutes of peoples’ times to talk about features? What about features that you’ve seen coming up in the sales/cust-dev cycle that aren’t tied to any specific current customers?

We do most of our review sessions over a 30 min skype call using video and screen sharing. Whenever, it makes sense, we’ll also do face-to-face interviews. The key to getting customers to take the call is the same as getting early customer interviews for your MVP – you have to frame the conversation around a problem they care about. We are not showing them a feature but a problem of theirs we’re solving. This applies to both customer initiated feature requests and internal ones.

Henri Liljeroos: Do you have a certain pool of users you use for interviews in stages 1 and 2 (Understand Problem and Define Solution)? I find it a bit troublesome to gather a group of users for every single feature. How do you do this in practice?

The easiest way to get a motivated customer to talk to you is to ask for additional information on a feature they requested (customer pull). We frame the initial call around understanding the underlying problem and during the call ask for permission to follow-up with an early mockup and/or push the feature to them when it’s ready.

Beyond that, I do use a pool of customers who are actively using the product and motivated to help. Customer Development is a great way for establishing these relationships organically. By the time you’ve gone through enough problem and solution interviews, you should have a core group of early adopters that are almost as invested in your product as you are.

Ricardo Trindade: In my case, my site uses a freemium model and I struggle between finding the correct balance between features for my customers (the ones who pay) and the users.

If you have paying users i.e. customers, I’d only listen to them and first understand how they use your product and how they are different from your non-paying users. Then, I’d use that knowledge to model my “free” account for optimal conversion.

Killing Features

Lindsay Brechler: What do you do if you kill the feature – either before development or during quantitative analysis? Do you notify the customer that requested (or is now using) the feature?

Yes in both cases. The first is easier. If while building the feature, we deem it “not worth building” (we can kill a feature at any stage), we stop, explain our reasons why, and suggest other possible solutions to the problem.

We did this recently with Lean Canvas when we removed some early work on “interview results tracking”. We realized that this was too big a problem to tackle for an activity that represented a small sliver in a startup’s lifecycle. We also had been using some good enough “cobbled up” alternative solutions. So we informed our user base we weren’t building this feature anymore, explained our reasons why, and told them how we were solving the problem ourselves.

Ricardo Trindade: Isn’t it “wrong” to release a user feature and then simply remove it when your testing shows it isn’t improving any metrics? Won’t the users feel they are being cheated, even though they aren’t spending a single penny for that feature?

It depends on how it’s done. We typically don’t do any marketing announcement (e.g. public blog post) until the feature proves to provide some value to enough customers. Partial rollouts, customer interviews, etc. all help to lower the risk along the way.

But in the case where a feature does get rolled out to everyone and still doesn’t move the needle, I wouldn’t hesitate removing it provided we shared our reasons.

The Unasked Question

I was surprised no one asked for details on how we measure the quantitative impact of features. Specifically, how we isolate the impact of individual features and track their effects over time. I think it’s because people assume metrics are the answer. But “traditional” metrics alone are not enough.

It’s time to say hello to the cohort (again). I’ll have a lot more to say on that shortly.

Become a Practice Trumps Theory member
(it's free)

Get access to more tactical content, videos, and hands-on techniques for systematically building a successful product...

  • http://twitter.com/xxxdeveloper Victor

    You misspelled “continuous” in your graphic for this article.

    [Reply]

    Ash Maurya Reply:

    thx – will fix

    [Reply]

  • Roger Cauvin

    As a product strategist, I’ve found concentrating on “features” distracts product teams from discovering and delivering true value to customers.  A feature is a property or characteristic of something.  That thing is the product.  When the team or prospects focus thoughts and energy on the product, they lose sight of what the customer will accomplish as they use the product.

    Instead, I recommend framing the product picture in user-centric terms.  Over a decade ago, Kent Beck coined the term “user story”, not “product story” or “user feature”.  Stories are about what people do and accomplish, not so much about what products have or do.

    We can organize our Kanban or planning board as a decomposition of user stories, and not the Leffingwell does it with his hard-coded, three-level hierarchy of epics, features, and stories.  A Leffingwell “epic”, unfortunately, doesn’t much resemble a true epic.  For example, “video streaming” is not, and is not a placeholder for, a long narrative in which our our hero (the user) accomplishes great things.  Instead, it refers to something with value only when put in the context of a user doing something useful (or enjoyable) with it.  Please see my recent blog entry, “An Epic Conversation”, for details on how the product strategy and development team can understand and maintain the full context and presumed value of what they are conceiving, building, and validating.

    [Reply]

    Ash Maurya Reply:

    I’m in agreement and if you see the last prequel post (http://www.ashmaurya.com/2011/07/how-we-build-features/), the first step towards building any feature is framing it using the underlying problem it solves or value it creates for the user. It has to be enough to justify it’s existence. 

    From there comes the mockup stage which when we storyboard the solution from a customer perspective. We validate again and then build.

    [Reply]

  • http://thesistown.com/writing/basics/dissertation-proposals dissertation proposal

    Always will be a new problems and bugs and will be new solutions for them also. I like what you wrote. It`s was helpful for me. I hope you don`t stop write about that. And some of your idea very interesting. Thanks man! 

    [Reply]

  • http://www.segodnya.ua/useful/internet/14271972.html webpromo

    Thank you for making this site very interesting! Keep going! You’re doing very well!

    [Reply]

  • http://www.segodnya.ua/useful/internet/14271972.html web promo

    Nice post! Can’t wait for the next one. Keep stuff like this coming.

    [Reply]